Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Lake Worth, FL
Gate access control in Lake Worth tends to fail in predictable ways: keypads corrode from salt air off the Lagoon, swing-gate hinges seize against concrete posts, and decades-old wiring gives out behind the gate operator. Most homes here were built between the 1940s and 1970s, so we’re usually working on original ornamental iron or chain-link gates that were never designed for automation. If your gate won’t open, won’t close, or won’t respond to the keypad, call (561) 725-8048 and we’ll give you a written price before any work starts.
Why Lake Worth Homes Are Different
Lake Worth sits between the Lake Worth Lagoon and the Atlantic, which means every metal gate in this city is exposed to salt air from two directions. Mild steel frames oxidize fast, galvanized hinges fuse to concrete posts, and operator gears seize within a few years of installation. We regularly see gates in the older neighborhoods near the historic downtown that have been zip-tied shut because the original hinges have corroded solid. The housing stock makes it worse: many properties near Dixie Highway and the surrounding blocks are rentals, and rental gates only get attention when something stops working. By then the corrosion has usually spread through the frame, the hinges, and the strike plate. Hurricane season adds another layer. When a storm pushes salt water and debris across the city, swing-gate posts bend and slide tracks warp, and we get a surge of repair calls every fall.
Our Main Lake Worth Services
These three service pages cover most of what Lake Worth homeowners call us about. Each one explains the common failures, what repair involves, and what to expect on pricing.
Gate Repair in Lake Worth
Swing gates and slide gates in Lake Worth fail differently than they do inland. Salt air corrodes weld points, hinges bind, and frames sag against posts that have shifted in the sandy soil. We repair the gate where it stands, replace only what’s failed, and leave you with photos of every adjustment and part we touched. Gate Repair in Lake Worth has the full breakdown of what we fix and what it costs.
Gate Installation in Lake Worth
New gate installations on older Lake Worth properties need more than a gate hung on posts. Many existing posts are undersized for automation, and some have concrete cores cracked by rusted anchor bolts. We document the post condition before we quote so you know whether we’re hanging a gate or starting from the footings up. Gate Installation in Lake Worth walks through the process and the price ranges.
Gate Motor & Opener in Lake Worth
Gate motors in Lake Worth are exposed to humidity and salt year-round, and the gears inside the operator housing suffer for it. We service nine major brands, so when a motor fails we usually repair it in place instead of steering you toward a full replacement. Gate Motor & Opener in Lake Worth covers the common failure points and repair pricing for each motor type.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Lake Worth
Gate access control in Lake Worth covers everything that tells the gate to open: keypads, remotes, phone entry, card readers, and video intercoms. The hardware sits outside in the same salt air that eats the gate itself, so contact points corrode, keypad membranes crack, and wiring insulation breaks down faster here than almost anywhere else in Palm Beach County. We service every major access-control component and correct course when a previous owner or a handyman has spliced wires in ways that trip the system. Gate Access Control is our full service page for this work.
Keypad Entry
Signs you need it
The keypad stops responding to some or all buttons, or works for the first code entry and then goes dead.
What it costs in Lake Worth
Keypad replacement typically runs $280-$540 depending on brand compatibility and whether the wiring behind the keypad is still intact.
How we do it
We test the keypad from the control board side, isolate whether the fault is in the keypad, the wire run, or the receiver, then quote the written price before replacing anything.
Phone Entry
Signs you need it
The gate won’t dial out, callers can’t get through to your phone, or you hear audio from the gate but the open command doesn’t trigger.
What it costs in Lake Worth
Phone entry system replacement usually lands between $350 and $650, with the higher end covering systems that include video calling.
How we do it
We check the cellular or landline connection, replace the handset or control module as needed, and test the full call-to-open cycle before we leave.
What Gate Access Control Costs in Lake Worth
| Item | Typical range in Lake Worth |
|---|---|
| Keypad entry replacement | $280-$540 |
| Phone entry system replacement | $350-$650 |
| Remote programmer / receiver replacement | $180-$340 |
Can you integrate phone entry with an existing gate motor in Lake Worth?
Yes. We wire phone entry into the existing operator’s open-command input and configure the call forwarding so the phone becomes the new entry key. Most systems integrate with a day or less of work on site.
What access control brands do you service in Lake Worth?
We service FAAC, BFT, Linear, Viking, DoorKing, LiftMaster, Elite, Ghost Controls, and Mighty Mule. That means we repair the system already on your property rather than pushing you toward a new brand. Call (561) 725-8048 for a written price.
Gate Parts & Welding in Lake Worth
Salt-air corrosion means Lake Worth gate repairs often stop being repairs and become rebuilds. A hinge that breaks off usually reveals rust inside the post, and a sagging gate often has a cracked frame weld hidden behind the sag. We stock hinge kits, roller sets, and rail brackets locally, and we weld on site with a mobile rig when the job calls for it. Gate Parts & Welding covers our fabrication and replacement range.
Hinge Replacement
Signs you need it
The gate scrapes the ground on the hinge side, the top hinge pulls away from the post, or the gate swings with a visible drop when it opens.
What it costs in Lake Worth
Hinge replacement with new galvanized or stainless hardware typically runs $180-$380 per hinge depending on post condition.
How we do it
We cut off the corroded hinge, core out the post if needed, re-anchor with epoxy-set bolts, and photograph the new setup before rehanging the gate.
Custom Welding
Signs you need it
The gate frame is cracked at a weld joint, a picket has snapped, or rust has thinned a frame member to the point it needs building back rather than patching.
What it costs in Lake Worth
Custom welding repairs generally run $150-$400 per section depending on the length of the weld and the steel thickness.
How we do it
We grind the area back to sound metal, weld in new steel to match the original profile, then prime and paint the repair before we document it.
What Gate Parts & Welding Costs in Lake Worth
| Item | Typical range in Lake Worth |
|---|---|
| Hinge replacement (per hinge) | $180-$380 |
| Custom welding repair (per section) | $150-$400 |
| Gate roller replacement | $120-$280 per roller |
Can you weld a broken ornamental iron gate in Lake Worth without replacing it?
In most cases, yes. We match the existing steel profile, weld the break, and recondition the paint. Only when the surrounding metal is too thin from rust do we recommend replacing that section. Call (561) 725-8048 for a written price.
Do you stock gate parts locally in Lake Worth or order everything in?
We keep common hinge kits, rollers, brackets, and receiver modules on our trucks, so most replacements happen same-day. Unusual hardware gets ordered with a firm written price before we begin.
Brands We Service in Lake Worth
Our trucks carry parts for FAAC, BFT, Linear, and Viking operators, plus hardware for the other five major brands we service. That local stock means most motor and board replacements happen the same day we diagnose the problem. See our brands for the full list of equipment we work on in Lake Worth.
Pricing for Gate Repair in Lake Worth, FL
| Service | Typical range in Lake Worth |
|---|---|
| Gate repair | $120-$1,400 |
| Gate installation | $1,100-$8,500 |
| Gate motor & opener repair | $140-$950+ |
| Gate motor & opener replacement | $300-$2,800+ |
| Keypad entry replacement | $280-$540 |
| Phone entry system replacement | $350-$650 |
| Hinge replacement (per hinge) | $180-$380 |
| Custom welding repair (per section) | $150-$400 |
| Gate roller replacement | $120-$280 per roller |
Two things push Lake Worth pricing above the inland average: salt corrosion that spreads damage from one component into three, and the challenge of matching 1940s-1970s wrought iron profiles on older properties. That’s why we hand you a written price before any work begins, with the scope itemized and agreed to on paper first.
Neighborhoods We Serve in Lake Worth
We work across the full city, from the historic downtown blocks near Lake Avenue to the residential streets west of Dixie Highway, down to the neighborhoods along the Lagoon. Response time for most Lake Worth calls is under two hours.
- Historic Downtown Lake Worth
- Parrot Cove
- College Park
- Mango Grove
- Royal Poinciana
Service Area - Cities Near Lake Worth
We also cover gate repair across the surrounding cities. That includes Wellington, FL, Greenacres, FL, Royal Palm Beach, FL, and West Palm Beach, FL. Dispatch is coordinated from our Miami office, but the crews serving Lake Worth work locally.
Serving Lake Worth, FL - Our Local Coverage Area
We’re based in the Lake Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Lake Worth
Most Lake Worth calls get a technician on site within two hours, and many jobs are completed same-day. A live person answers the phone 24/7, so you reach a real dispatcher, not a voicemail queue. Call (561) 725-8048 and we’ll give you a firm arrival window.
Most repair work, including motor replacement and hinge rebuilding, doesn’t require a permit. A full gate installation with new concrete footings may need city approval. We check Lake Worth’s current permit requirements on every install and tell you up front if one applies.
Yes, we work with landlords and property managers across Lake Worth. We provide the written price and photo documentation that makes it easy to show owners what was found and what was fixed. The same flat written quote applies, no surcharge for rental work.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lake Worth Customers Say
"Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.