Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Repair for West Palm Beach Homeowners
Gate repair in West Palm Beach usually means one of three things: a motor that quit, a gate that drags or sags, or a lock that no longer latches. We’re Vance Gate Repair, and we’ve repaired and installed more than 22,000 gates since Adrian Vance started the company in 2014 out of commercial access-control work. We service every major automation brand, we hand you a written price before any tool comes off the truck, and we leave a photographed record of every adjustment on every visit. If your gate is stuck open, stuck closed, or making a sound it didn’t make last week, call (561) 725-8048 and a live person answers, day or night.
What we bring to a repair call in West Palm Beach is simple: we name what we found, we name what it costs, and we name what we left behind. No verbal estimates. No surprise invoice. No gate company that disappears after the check clears. You’ll see the price in writing before we start, and you’ll see photos of the work before we leave.
What Our Gate Repair Service Includes
Every gate repair we take on in West Palm Beach starts with a diagnosis, not a guess. We check the mechanical path, the electrical load, and the safety circuits before we touch anything. Here’s what that means for each type of repair we handle.
Electric Gate Repair
Electric Gate Repair covers the powered side of your gate: the motor, the control board, the transformer, the wiring, and the safety devices. We trace voltage with meters and measure amperage draw at the motor to find the failed component instead of swapping parts on a hunch. The gate’s problem is usually one bad part, and we replace that part, show you the reading that pointed to it, and photograph the new component in place.
Automatic Gate Repair
Automatic Gate Repair is what most West Palm Beach homeowners call us for: the gate that won’t open when you press the remote, or won’t close all the way, or reverses for no reason. We check the limit settings, the safety loops, the photo-eyes, and the receiver before we replace anything. Often the fix is a component reset and a setting adjustment, not a new motor, and the written record we leave shows exactly what was changed and why.
Hinge & Post Repair
Hinge & Post Repair handles the weight-bearing part of the gate: the hinges, the post, the pivot points, and the ground they sit in. In South Florida, a gate post set in sandy soil shifts over time, and that shift puts load on the hinges until something binds or breaks. We square the post, replace or re-weld the hinges, and check that the gate swings true before we call the job done. If the post has failed at the base, we’ll tell you that plainly and give you a written price for a proper repair.
Gate Realignment
Gate Realignment fixes the gate that scrapes the driveway, hangs crooked, or won’t close against the latch. A gate only has to settle a half-inch out of square to start dragging, and every drag cycle makes the problem worse. We measure the gap on both sides, adjust the hinges or the post, and bring the gate back to level. The fix usually doesn’t require new parts; it requires a technician who can measure and set correctly.
Lock Repair
Lock repair covers gates that won’t latch, deadbolts that won’t throw, electric strikes that won’t release, and keypads that won’t accept the code. Whether you have a mechanical lock, a maglock, or a keypad-controlled strike, we repair the lock you have rather than selling you a new one. This is also where access control and gate repair overlap: if the lock is fine but the signal isn’t reaching it, we find where the circuit is broken.
Weld & Rust Repair
Weld and rust repair deals with steel and aluminum gates that have cracked, corroded, or separated at a joint. Salt air near the coast speeds up every corrosion cycle, and a crack in a welded joint will spread. We grind out the damaged material, weld the joint, and coat the repair. The photo record you receive shows the before, the weld itself, and the finished surface.
Every one of these services follows The Haven Standard: a written scope, a written price, and photographic evidence on every visit. That’s the level of documentation Adrian Vance brought over from commercial access-control sites in 2014, and West Palm Beach homeowners shouldn’t settle for less.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Repair
We carry parts for and regularly repair LiftMaster operators, the most common motor on West Palm Beach driveways. LiftMaster failures we see most often are the capacitor, the control board, and the limit switch assembly, and we keep those in stock on the truck. If your LiftMaster hums but won’t move, or opens by itself at night, we can usually resolve it the same day.
We also work on FAAC, Elite, and Mighty Mule systems, along with Ghost Controls, BFT, Linear, Viking, and DoorKing. A Mighty Mule solar operator on a rural property in The Acreage fails differently than a FAAC hydraulic operator in a gated Palm Beach Gardens community, and the diagnosis has to match the equipment. Whether your gate runs LiftMaster or any other make, we service what’s already on the property and we don’t push replacement when repair is the right call.
BeforeAfterSigns You Need Gate Repair Right Now
- The gate reverses or stops halfway. This usually points to a photo-eye (the infrared beam that stops the gate if something crosses the path) that’s misaligned, or a safety-loop sensor failure. If the gate can’t see the beam, it assumes something is in the way and refuses to close. A gate that reverses is a safety circuit doing its job; it just needs a technician to find out which circuit is triggering.
- The motor hums but the gate doesn’t move. A humming motor with no movement often means a bad capacitor or a stripped drive gear. Running the motor in that condition will burn it out completely. Turn the operator off at the breaker and call us; the repair is usually faster and cheaper than a full motor replacement.
- The gate grinds or scrapes the driveway. This is the classic sign of a gate that has settled out of square or lost a hinge bearing. Every scraping cycle wears down the gate’s bottom edge and stresses the hinges. Left alone, the gate gets harder to move until something breaks.
- The gate won’t stay closed or won’t latch. A gate that won’t latch is an open door for whatever walks by. This can be a strike alignment issue, a warped gate leaf, or a lock that’s binding. We fix the latch, and we check the reason the latch failed rather than just forcing it back into place.
- The gate opens on its own or responds to remotes it shouldn’t. This can indicate a receiver interference issue or a control board that’s failing and sending phantom signals. In neighborhoods where several homes use the same operator brand, a mis-set dip switch or a wireless receiver with too wide a code range can cause cross-activation. We test and re-code the receiver, and we show you the new code setting before we leave.
Our Gate Repair Process - Step by Step
- 1
We answer the phone and schedule the visit. You call (561) 725-8048 and a live person answers, at any hour. We ask what the gate is doing, what brand the operator is, and when it started. Then we give you a day and time for the technician to arrive.
- 2
The technician diagnoses before touching anything. Our technician arrives, walks the gate through a full cycle, and measures: voltage at the motor, amperage draw, limit-switch position, photo-eye alignment, and hinge play. We don’t replace parts until the measurement names the failed component.
- 3
You get a written price before the work starts. Once the diagnosis is complete, we hand you a written scope and a flat price. That’s Haven Standard Clause 1: have it in writing. You approve the price before we pick up a tool, and that price doesn’t change at the end of the job.
- 4
We do the repair and document it. The repair is completed, and every adjustment, every part number, and every setting is photographed and noted. You get a photo log of what was found, what was set, and what was installed, and we file the same record in our job file.
- 5
We test the full cycle and walk you through it. We run the gate through at least ten full open-and-close cycles and test every safety device. Then we show you the written record, explain what was done, and confirm the 365-Day Done Right Promise applies to every part of the repair.
How Much Does Gate Repair Cost in West Palm Beach?
Most gate repairs in West Palm Beach run between $180 and $650 depending on the component and the access needed. A limit-switch reset or photo-eye realignment typically falls in the $180 to $250 range. A capacitor or control-board replacement on a LiftMaster or FAAC operator usually lands between $280 and $450. A full swing-gate motor replacement runs $850 to $1,800 depending on the brand and whether the arm bracket and mounting are intact. Hinge replacement or welding work varies with the size and weight of the gate, but most jobs fall between $200 and $600 per hinge unless the post itself is failed.
What moves the price: the brand of your operator, the age of the unit, whether the failure is mechanical or electrical, and how accessible the components are. A Mighty Mule solar unit on an Acreage property is a different job than a LiftMaster in a West Palm Beach driveway, and the written price should reflect that. To avoid overpaying, get a price in writing before the work is approved, confirm whether parts are OEM or aftermarket, and ask what documentation you’ll receive when the job is done. A free estimate from Vance Gate Repair includes the diagnostic visit, the written price, and our recommendation; you’re never obligated to proceed.
Gate Repair Near West Palm Beach - Our Service Area
We run gate repair calls across West Palm Beach and the surrounding communities: Westgate, Riviera Beach, Lake Park, North Palm Beach, Royal Palm Beach, Palm Beach, Palm Beach Gardens, Palm Springs, Greenacres, The Acreage, and Lake Worth. Most repair calls in these areas can be scheduled within a day or two. If you’re in Westgate or near Riviera Beach, we’re already working in your neighborhood, and our home page has more on what we do. This is our full West Palm Beach gate repair coverage.
Serving West Palm Beach, FL - Our Local Coverage Area
We’re based in the West Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Repair in West Palm Beach
Gate repair is the diagnosis and correction of a gate that isn’t opening, closing, latching, or moving correctly, whether the cause is mechanical, electrical, or structural. In West Palm Beach, the most common calls are for failed motors, misaligned photo-eyes, sagging hinges, and gates that won’t latch. At Vance Gate Repair, we complete the repair under The Haven Standard: a written price before work starts and a photographed record of every adjustment before we leave.
Most gate repairs in West Palm Beach are completed in one visit lasting 60 to 90 minutes. A limit-switch adjustment or photo-eye realignment can take less; a motor replacement on a LiftMaster or FAAC unit usually takes about two hours. If a part has to be ordered, we give you that timeline in writing before we begin, and most common parts are already on the truck.
Most gate repairs in West Palm Beach cost between $180 and $650, with motor replacements running $850 to $1,800 depending on the brand and configuration. You’ll get a flat written price before the work starts, and the price we hand you is the price you pay. Call (561) 725-8048 for an exact quote; the estimate visit is free, and you can see the detailed pricing section above.
Yes, LiftMaster is one of the brands we service most often in West Palm Beach, and we carry common LiftMaster components on the truck: capacitors, control boards, limit switches, and receivers. We also service FAAC, Elite, Mighty Mule, Ghost Controls, BFT, Linear, Viking, and DoorKing. Whatever motor is already on your property, we repair it instead of steering you toward a replacement.
Yes. A gate stuck open in West Palm Beach is a security problem, and a live person answers our phone 24 hours a day, seven days a week. We prioritize calls where the gate is stuck open or blocking the driveway. Call (561) 725-8048 and tell us the situation; we’ll give you a straight answer about timing and price.
Every gate repair from Vance Gate Repair carries the 365-Day Done Right Promise: if the repair is not right, we make it right within one full year, with no argument and no additional fee. That’s a full year of coverage on parts and workmanship. The promise is documented in writing and filed with your job record.
Clear access to the gate operator and the control box is the most helpful step: move vehicles away from the gate’s swing path, trim back any vegetation touching the gate or the operator, and locate the remote or keypad code so the technician can test the system. If the gate is on an automatic timer, leave a note or just let the technician know; the rest of the preparation is handled by the technician on-site. Call (561) 725-8048 with any questions before the visit.
Schedule Your Gate Repair Service in West Palm Beach Today
If your gate is stuck, grinding, or refusing to latch, call Vance Gate Repair at (561) 725-8048. A live person answers around the clock, and the estimate is free, written, and handed to you before the work starts. You’ll know the price before we begin, and you’ll have a photographic record of the repair when we’re done. No voicemail loops, no surprise invoices, no guesswork.
Written by Adrian Vance, Owner at Vance Gate Repair West Palm Beach, serving West Palm Beach since 2014.