Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Installation for West Palm Beach Homeowners
A new driveway gate in West Palm Beach typically costs between $3,800 and $14,000 installed, depending on the gate type, material, and whether you need a new automated operator. Most standard single swing gate installations we complete run from $3,800 to $6,500. That price is written down and handed to you before any work starts, so there’s no guessing and no surprise invoice at the end.
Vance Gate Repair West Palm Beach has installed and repaired more than 22,000 gates since Adrian Vance started the company in 2014 out of commercial access-control work. We bring the same documentation habit to residential driveway gates: a written scope, a written price, and a photo record of what we did, left with you when we leave. A live person answers the phone 24/7 at (561) 725-8048. If you’re in West Palm Beach and the gate is failing, sagging, or simply not there yet, call and we’ll put the numbers on paper.
What Our Gate Installation Service Includes
Every gate installation we do in West Palm Beach starts the same way: we look at the site, measure the opening, check the ground and the existing posts, and then hand you a written price. No verbal estimate, no “call for a quote” routine. The scope includes the gate itself, the hardware, the operator if you’re automating it, and a documented photo record of the finished job. Here’s what we install, gate type by gate type.
Driveway Gate Installation
A driveway gate is the main vehicular entrance gate, and it’s the one that fails most visibly because it cycles hundreds of times a month. We install single and double driveway gates in aluminum, steel, or iron, and we size the operator to the gate weight, not to what’s cheapest on the shelf. In West Palm Beach, where salt air and afternoon thunderstorms are normal, we spec stainless steel hinges and powder-coated frames so the gate isn’t rusting at the weld points within two years.
Pedestrian Gate Installation
A pedestrian gate is the separate walk-through gate beside the driveway gate, and it gets abused more than any other gate on the property because people slam it, lean on it, and let it swing in the wind. We install pedestrian gates that match the driveway gate in style and finish, with self-closing hinges and a latch that won’t rattle loose after six months. If the walk gate is part of a larger access control plan, we wire it for a keypad or an intercom at the same time.
Sliding Gate Installation
A sliding gate runs on a track or a cantilever system and is the right call when the driveway slopes upward or there isn’t room for a swing gate to arc into the yard. We install track, V-track, and cantilever sliding gates, and we pay close attention to the track bed and the roller alignment because a sliding gate that binds is a motor killer. Most sliding gate jobs in West Palm Beach take one to two days once the gate is fabricated, and we leave the track clean and photographed.
Swing Gate Installation
A swing gate is the most common residential gate, and it’s the one where we see the most installers cut corners on the hinge posts and the operator arm geometry. We set hinge posts in concrete with a minimum depth based on the gate weight, and we set the operator arm bracket to the brand’s exact spec rather than where it’s convenient. A swing gate on a badly set post will sag within a year; we set it so it won’t.
Double Gate Installation
A double gate is two leaves that meet in the middle, and it doubles the alignment work because both leaves have to meet evenly and stop at the same moment. We install double swing and double sliding gates, with a center drop rod or a magnetic lock if you want the gate to actually secure. On automated double gates, we set the operator to sequence both leaves correctly so one doesn’t slam into the other on every open cycle.
Security Gate Installation
A security gate is a gate built to delay or stop forced entry, not just to mark the property line, and that changes the material spec and the locking hardware. We install steel security gates with reinforced frames, tamper-resistant hinges, and operators rated for high-cycle use, plus the access control wiring if you want keypad, phone, or fob entry. In West Palm Beach neighborhoods where property crime is a real consideration, a security gate is a physical control, not a decoration, and we build it that way.
Every one of these installations is quoted before we start, and every one leaves you with a photo log of what we installed and a written record of the part numbers. That’s the Haven Standard, and it’s not an upsell; it’s how we work.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Installation
We install and service LiftMaster operators more than any other brand on residential jobs in West Palm Beach. LiftMaster’s LA500 and RSW12 models are what we most often spec for swing and sliding gates under 1,600 pounds, and we stock the OEM control boards, limit switches, and remotes so a warranty repair or a programming change doesn’t mean waiting on a parts shipment.
FAAC is the brand we lean toward when the gate is heavier, or the cycle count is high, or the installation is commercial-grade on a residential property. FAAC hydraulic operators run quietly and hold up to daily cycling better than most electric-drive units, and we’ve been setting them up since Adrian was doing access control on commercial sites back in 2014. Ghost Controls is a frequent retrofit choice for homeowners who already have a manual gate and want it automated without replacing the whole structure, and we install and program those kits with the same written-price rule as a full gate job. Whether the existing motor is Elite, Mighty Mule, Viking, or something else entirely, we work on whatever is already on the property rather than steering you toward a replacement you don’t need.
BeforeAfterSigns You Need Gate Installation Right Now
- The gate is sagging and the leaf drags on the ground. A sagging gate means the hinge post is failing or the frame welds are cracking, and a gate that drags puts constant load on the motor. The longer it runs like that, the more likely you’re looking at a full post reset instead of a hinge replacement.
- You’re holding the gate open manually every day. If the operator gave up and you’ve been sliding or swinging the gate by hand for weeks, the limit switches or the motor are likely beyond repair and the gate itself may be out of spec for the operator’s rating. Holding it open manually also leaves the driveway unsecured, which defeats the point.
- The gate is older than 10 years and the repair bills are stacking. A gate that’s needed three service calls in a year is telling you something. When the cost to repair starts approaching half the cost of a new gate and operator package, we’ll tell you that in writing and let you decide.
- You added a fence or changed the driveway width. A gate that no longer fits the opening or doesn’t match the new fence line needs to be replaced, not patched. We see this a lot in West Palm Beach after a property line adjustment or a fence rebuild, and it’s a straightforward measure-and-install job.
- The gate doesn’t stop when it should. A gate that doesn’t respond to the safety photo-eyes or reverses late is dangerous, especially with kids or pets on the property. If the safety edge isn’t working and the operator can’t be brought back into spec, a new installation with current safety hardware is the right call.
Our Gate Installation Process - Step by Step
We do the same thing on every install, every time, in the same order. It’s not a mystery process, and you’ll see the documentation at each step.
- 1
Site walk and measure. We come out, measure the opening, check the ground slope, the existing posts, the power access, and the swing or slide clearance. We take photos of everything. This visit is free, and you get a written scope afterward.
- 2
Written quote. Before any work starts, we hand you a flat price in writing. That’s Haven Standard Clause 1. The quote includes the gate, hardware, operator if applicable, and any access control wiring. No verbal estimate, no range that drifts upward mid-job.
- 3
Gate fabrication and prep. Once you approve the written quote, we order or fabricate the gate to the measurements we took. We prep the posts, pour the concrete footings at depth, and run the power conduit if the gate is automated. We tell you what brand and part number we’re installing before it goes in.
- 4
Installation and programming. We set the gate, mount the operator, wire the safety edges and photo-eyes, and program the open and close limits. We set the force sensitivity so the gate stops properly on a real obstruction, not just on a clean test. Every adjustment gets photographed.
- 5
Walkthrough and documentation. Before we leave, we run the gate through full cycles with you watching, show you the operator, the safety edges, and the manual release, and hand you the photo log and the written record of what was installed. That record gets filed in your job history, so if anything comes up later, no one has to guess what was done.
How Much Does Gate Installation Cost in West Palm Beach?
A basic single swing gate in aluminum, installed without automation, typically runs $3,800 to $5,500 in West Palm Beach. A double swing gate in steel with a LiftMaster operator runs $6,500 to $9,500. A sliding gate on a cantilever system with an operator runs $8,000 to $14,000 depending on the length and the motor. A pedestrian gate alone is usually $1,200 to $2,800. These are the numbers we put on paper, and they’re the numbers on the invoice, because the gate installation pricing is agreed before any work starts.
What moves the price: the gate material and weight, whether it’s automated or manual, the operator brand (FAAC and LiftMaster run higher than a basic aftermarket board, and they’re worth it), the condition of the existing posts, and whether you want access control like a keypad, phone entry, or a fob reader. The way to avoid overpaying in West Palm Beach is to get the quote in writing and ask what brand and part number you’re paying for. A free estimate from us includes all of that, plus a second opinion on any written estimate you’ve gotten from another company. Bring the paperwork; we’ll review it at no cost.
Gate Installation Near West Palm Beach - Our Service Area
We install gates throughout West Palm Beach and the surrounding communities, including Westgate, Riviera Beach, Lake Park, North Palm Beach, Royal Palm Beach, Palm Beach, Palm Beach Gardens, Palm Springs, Greenacres, The Acreage, and Lake Worth. Most residential installations are scheduled within one to two weeks of the site walk, and we keep you updated with a named technician and a photo before arrival. If you’re in Riviera Beach or over in Westgate, we’ll bring the same written-price rule and the same photo documentation to your job. And if you found this page after reading our home page or the Gate Installation in West Palm Beach service overview, you already know the standard. Call and we’ll come measure.
Serving West Palm Beach, FL - Our Local Coverage Area
We’re based in the West Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Installation in West Palm Beach
Our gate installation in West Palm Beach is the process of setting a new driveway, pedestrian, sliding, swing, double, or security gate at your property, including the posts, hardware, and optionally an automated opener and access control. We measure, quote a written price, install, and leave you a photo record. It covers everything from a manual walk gate to a full automated double gate with keypad entry.
Most standard single gate installations in West Palm Beach take one to two days on site, not counting fabrication time if the gate is custom-ordered. Sliding gates and full security gate systems with access control can take two to three days. We’ll give you a written timeline with the quote, and we hit it.
A manual single swing gate typically runs $3,800 to $5,500, and an automated double gate runs $6,500 to $9,500. Sliding gates run $8,000 to $14,000. For an exact quote on your opening, call (561) 725-8048 and we’ll come measure at no charge. The quote is written, so there’s no drift.
Yes, we install and service LiftMaster and FAAC operators routinely, along with BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep OEM parts in stock for the common residential models. We work on whatever motor is already there rather than steering you to a replacement.
If your gate failed and the driveway is unsecured, we can often get a technician out quickly, and a live person answers the phone 24/7 at (561) 725-8048. Full installations are scheduled, but we’ll come assess the situation fast and secure the opening if needed.
Every gate and operator we install is covered by our 365-Day Done Right Promise: if the installation isn’t right, we make it right within one year at no charge. Manufacturer warranties on the gate and operator also apply, and we handle the warranty paperwork. No argument, no fee, no expiration date within that window.
Clear the vehicles out of the driveway, move any planters or decorations near the posts, and let us know where your property line is if you’re unsure. We’ll handle the concrete, the power, and the old gate removal. We’ll walk you through what to expect on the site visit, and the written quote will name every piece of the job.
Schedule Your Gate Installation Service in West Palm Beach Today
We’ll come measure the opening, hand you a written price, and install the gate the same way we’ve done 22,000 times since 2014: with documentation, with respect, and with no surprise invoice. The estimate is free, and the record is yours to keep. Call (561) 725-8048 now and a live person will answer, day or night.
Written by Adrian Vance, Owner at Vance Gate Repair West Palm Beach, serving West Palm Beach since 2014.