Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Jupiter Farms
A gate that won’t open on a 1.25-acre Jupiter Farms property isn’t an inconvenience, it’s a stranded horse trailer and a blocked work truck. Most Gate Repair calls we run in Jupiter Farms involve wide-clearance swing or slide gates, 16 to 20 feet, built to pass farm equipment, not ornamental subdivision panels. We dispatch locally and carry the parts that actually fail out here: contactors for obsolete boards, heavy hinge pins for wide gates, photoelectric UL 325 sensors for pre-modern operators. Call (561) 725-8048 and a live person answers, day or night.
Why Vance Gate Repair West Palm Beach Is Jupiter Farms’s Preferred Gate Repair Company
The homes in Jupiter Farms predate most modern gate automation standards. We work on gates hung in the 1970s through 1990s, on operators whose manufacturers stopped making the control boards a decade ago. Adrian Vance founded this company in 2014 after years wiring commercial access-control systems, and the habit stuck: every Jupiter Farms visit leaves a photographed record of what was found, what was adjusted, and what was installed. You get the same wiring-diagram documentation on a residential driveway gate that a commercial dock gets.
We price the job in writing before any tool comes off the truck. That’s Haven Standard Clause 1. The flat price covers the repair, the parts, and the re-tuning we usually have to do after the main fix. If the repair isn’t right, the 365-Day Done Right Promise means we come back and make it right, no argument, no fee, within a full year. You’ll also get a background-checked, uniformed technician whose name and photo arrive before the visit.
Jupiter Farms customers call us because the gate behaves differently after every June storm, and a company that doesn’t work the dirt roads out here won’t know why. We do. Most calls from Jupiter Farms get same-day or next-morning scheduling, and we already know where 130th Avenue North, 126th Trail, and the limerock approaches off Randolph Siding Road are without asking for directions.
Our Gate Repair Services in Jupiter Farms
Gate Realignment
Wide swing gates on Jupiter Farms properties shift with the seasons. The limerock driveway surface ruts after summer downpours, the gate’s ground clearance disappears, and a gate that swung clean in April drags by June. We re-set the hinge geometry, shim or re-foot the post as needed, and re-tune the operator’s travel limits to match the actual arc, not the arc that was measured years ago.
Hinge & Post Repair
Sandy loam in Jupiter Farms holds water at the post base, and water is what kills a hinge post: seasonal heave in the wet months, rust-out on ferrous hinges, and a gate that leans so gradually you don’t notice until the panel hits the ground. We replace hinge pins, cut out rotted post sections, re-foot with proper depth and concrete ballast, and weld or bolt new hinge assemblies rated for a 20-foot span. Most of these posts were never deep-footed for the gate they carry.
Automatic Gate Repair
Old operators in Jupiter Farms die in predictable ways: a wet-season lightning strike takes out the control board, and the board hasn’t been manufactured since 1997. When an old FAAC or Linear operator stops responding, we first check whether the board, limit switch, or receiver module can be sourced or rebuilt. If not, we tell you straight, and the retrofit price is written before we begin. We service FAAC, BFT, Linear, Viking, LiftMaster, DoorKing, Elite, Ghost Controls, and Mighty Mule, so we work on whatever motor is already mounted, not just the brand we’d prefer to sell.
Lock Repair
Wide farm gates in Jupiter Farms usually carry heavier locking hardware than residential gates: slide-bolt assemblies, magnetic locks on automated paddock entries, and keyed panic hardware on the occasional rear access gate. We repair, replace, or re-key the lock, then confirm the operator’s interlock isn’t fighting the lock when the gate cycles. A driveway gate that opens automatically but can’t be walked through when the power’s out is still a security problem.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Jupiter Farms
Most Jupiter Farms gates run on FAAC, BFT, Linear, or Viking operators, and we carry or can quickly source parts for all of them, plus five more major brands. We stock common contactors, limit switches, receiver modules, and photoelectric sensors locally so we’re not waiting on a parts drop-ship when your gate is down. If we can repair the motor you have, that’s the recommendation, not a replacement pitch.
We also stay current on UL 325 entrapment protection requirements, which matter on older Jupiter Farms gates that were installed before modern safety standards existed. A retrofit to add photoelectric sensors or edge detection isn’t a upsell; it’s required for safe automated operation, and we write it into the scope with the same transparent pricing as everything else.
Common Gate Repair Problems We See in Jupiter Farms Homes
- Limerock-seasonal drag. Summer rains rut the unpaved driveway under the gate arc, the ground clearance disappears, and the gate grinds or hangs up mid-travel. We re-surface the arc with compacted base and re-set the operator’s limits so the gate moves freely again.
- Obsolete control boards. Jupiter Farms has a high concentration of 1980s and 1990s operators. A wet-season lightning strike fries an old board and the manufacturer stopped making it years ago. Sometimes the answer is a rebuilt board; often it’s a full operator retrofit, quoted in writing before work begins.
- Post heave and rust at the hinge post. Sandy loam holds rainwater at the post base, the soil heaves, and ferrous hinges rust out on wide-clearance gates. Re-footing the post and replacing the hinge assembly is a bigger job than it looks, and it’s the core fix on a large share of Jupiter Farms calls.
- Gate geometry out of plumb. A 19-foot gate hung from a single post exerts massive torque. After years of storms, the panel drifts out of plumb and the operator’s travel limits no longer match the arc. We re-hang the panel, re-set limits, and photograph the new position before we leave.
Pricing for Gate Repair in Jupiter Farms, FL
A gate realignment in Jupiter Farms typically runs $225 to $450, depending on whether the hinge post needs shimming or the gate arc needs resurfacing. Hinge and post repair runs $350 to $900 when we’re cutting out a rotted post and re-footing it with concrete ballast. An automatic gate operator retrofit, which is what most older Jupiter Farms gates end up needing after a board failure, runs $1,200 to $2,800, depending on the motor and the safety retrofit required. A manual lock repair usually lands between $150 and $300. The price is written before any work starts, and that’s the price you pay. Call (561) 725-8048 for a free estimate.
We Also Serve Cities Near Jupiter Farms
Our Gate Repair in Jupiter Farms coverage extends to the surrounding areas of West Palm Beach, Westgate, Riviera Beach, and Lake Park. If you’re just outside the Farms on a paved subdivision lot, the gate problems are different, and we handle those too. Call (561) 725-8048 and tell us what the gate is doing.
Serving Jupiter Farms, FL - Our Local Coverage Area
We’re based in the Jupiter Farms area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Jupiter Farms
Your unpaved limerock driveway ruts and shifts after the wet-season storms that start in May, which raises the ground under the gate arc and closes the clearance that was set in the dry season. We re-surface the arc with compacted base and re-tune the operator’s travel limits, then photograph the new setting so you have a record of what was changed. It’s a seasonal fix on almost every unpaved driveway in Jupiter Farms. Call (561) 725-8048 for an exact quote, and we’ll come see the clearance before the next storm cycle.
Sometimes, but not always. If the operator is a FAAC, BFT, or Linear from the mid-1990s, we can often source a rebuilt control board or a drop-in replacement receiver module. If the exact part is obsolete and the only fix is a board-level rebuild that costs more than a new operator, we’ll tell you that in writing and let the numbers speak. Everything is quoted before we start, and if it can’t be safely repaired, we won’t sell you a board that fails in six months. Call (561) 725-8048 and we’ll identify the model and give you a straight answer.
Yes, if the gate is automated and people or animals move through it. Modern UL 325 entrapment protection standards apply when we service or retrofit an operator, and a gate that predates those standards was hung before the safety requirements existed. We add photoelectric sensors or edge detection as part of the scope, written into the quote before any work begins. It’s not an upsell, it’s the law and it’s the right way to leave a working gate. Call (561) 725-8048 and we’ll walk the gate with you and explain exactly what’s required.
Re-grading changed the elevation under the gate’s travel path, which means the gate roller track or the ground clearance is no longer level with the operator’s travel limits. The gate now fights the surface, the motor overloads, and it stops mid-travel. We re-level the roller assembly or re-set the track, then re-tune the operator so it doesn’t overload. It’s a common problem after any driveway re-grade in Jupiter Farms. Call (561) 725-8048 for a free estimate and we’ll tell you what moved.
Yes. Almost every Jupiter Farms property with horses has both, and the manual paddock gate hardware is often heavier than the driveway gate: livestock-grade hinges, welded frames, latches that get kicked and bent. We send one tech who can rebuild a paddock gate hinge and then re-tune the driveway operator in the same visit. It’s one written price for both, and you get the photo log for everything we touched. Call (561) 725-8048 and tell us what’s on the property.
On a horse property off 130th Avenue North, our tech found a 19-foot FAAC swing gate dragging into a post-rain rut and throwing the panel out of plumb at the hinge post. The original 1980s gate operator had no safety photocell and the rack and pinion had worn teeth from years of grinding over shifted limerock. We re-footed the hinge post, resurfaced the gate arc with compacted base, and installed a modern FAAC operator with UL 325 entrapment protection, then re-tuned the loop detector so the gate free-exits but doesn’t ghost-open when the neighbor’s horse trailer passes.
If your gate is down, dragging, or dead after a storm, call (561) 725-8048. A live person answers 24/7. We’ll give you a written price before any work starts, and you’ll have the photo log in hand when we leave.
Written by Adrian Vance, Owner at Vance Gate Repair West Palm Beach, serving Jupiter Farms since 2014.