Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Lantana
Gate installation in Lantana runs between $2,800 and $9,400 for most residential jobs, depending on gate type, material, and whether you need an automatic operator. A standard aluminum single swing gate with manual hardware starts around $2,800, while a custom double swing gate with an operator and intercom typically lands between $5,500 and $8,900. We serve all of Lantana, from the canal-side blocks off East Ocean Avenue to the neighborhoods west of I-95, with same-week scheduling for most installations. Call (561) 725-8048 and we’ll give you a written price before anyone picks up a tool.
Here’s what matters in Lantana specifically for Gate Repair - Lantana: this is a salt-air town. The Intracoastal runs along the entire eastern edge, and that changes what hardware we specify, how we set posts, and which operators we recommend. We’ll get into the details below.
Key Takeaways
- Driveway gate installation in Lantana typically runs $2,800-$9,400, with the range driven by gate material, size, and automation.
- Salt air from the Intracoastal corrodes steel mounting hardware on aluminum gates within 3-5 years, so we specify stainless fixings and galvanized posts on every coastal job.
- Palm Beach County wind-load code requires automatic gate operators to fail-safe open, which affects which motors we can legally install here.
- Adrian Vance has been working on gates in South Florida since 2014, and our written-price policy means you know the number before work starts.
Why Vance Gate Repair West Palm Beach Is Lantana’s Preferred Gate Installation Company
Vance Gate Repair West Palm Beach has built its local reputation in Lantana the same way Adrian Vance built his commercial access-control business starting in 2014: written pricing, documented work, and no surprises. When we install a gate in Lantana, you get a written scope and price before any work begins, and you get a photographic record of what was found, what was set, and what was installed when we leave. That’s what we call The Haven Standard, and it applies to every job we do in town.
Our customers in Lantana tell us it plainly: they’ve been burned by verbal estimates and handshake pricing before. So we do things differently. Under Clause 1 of the Haven Standard, the flat price is written and handed over before work starts. No “call for a quote,” no final invoice that doesn’t match the first number. If you have a written estimate from another company, we’ll review it free of charge as a second opinion.
We answer the phone 24/7. A live person picks up, not an automated attendant. If your gate fails late in the evening and you’re wondering whether a repair makes more sense than an installation, you’ll talk to a human being who can help you decide.
We also bring a commercial-grade documentation habit to residential gate work. Every visit includes a photo log of every adjustment and a written record of part numbers installed. That means the next time a technician works on your gate, they won’t be guessing. And neither will you.
BeforeAfterOur Gate Installation Services in Lantana
Driveway Gate Installation
Driveway gates are the most common installation we do in Lantana, and for good reason. The town’s roughly one-square-mile footprint means lots are compact, driveways are short, and a gate that opens smoothly without eating into the street right-of-way is essential. We measure for swing and slide configurations, account for the slope of your driveway apron, and specify hardware that will survive the salt air coming off the Intracoastal. A typical aluminum driveway gate with manual hardware starts around $2,800. Add automation and you’re looking at $4,500-$7,000 depending on operator brand and access controls.
Pedestrian Gate Installation
Pedestrian gates in Lantana are often paired with an existing fence or hedge line, and they take a beating from the same marine conditions as larger gates. We install pedestrian gates with stainless hinges and latch hardware as standard, not as an upgrade. If the gate is on the water side of the property or within sight of the Intracoastal, we’ll recommend aluminum or galvanized steel with stainless fixings. Most Lantana pedestrian gate installations run between $900 and $2,400, including post setting and hardware.
Sliding Gate Installation
Sliding gates make sense on Lantana lots where the driveway is short and a swing gate would arc out over a sidewalk or into landscaping. A slide gate rides along a track, which means the concrete pad under the track needs to be stable. On older Lantana homes with aging slab work, we may need to pour a new track bed, which adds to the cost. Slide gate installations in Lantana typically run $4,200-$8,500 depending on width, material, and whether we’re handling the power run for an operator. The motor itself is a separate line item we’ll price in writing.
Swing Gate Installation
Swing gates are the classic Lantana driveway gate, especially on the 1950s-1970s concrete block stucco homes that dominate the residential core. A single swing gate with a FAAC or LiftMaster operator is a clean, dependable setup for a modest lot. The thing to watch in Lantana is the hinge post. If the post is set in an old concrete slab that’s shifted, the gate will sag and the operator will fight it. We set new hinge posts in deeper footings with galvanized steel and stainless anchors. Single swing gate installation with automation runs $3,800-$6,200. Double swing gates run higher, $5,500-$9,400, because you’re mounting two operators or one dual-arm system and both leafs need to be balanced independently.
If you need a double gate, we’ll talk you through your operator options: one dual-arm operator on a single post, or two individual operators wired together. We service FAAC, BFT, Linear, Viking, LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we’ll match the operator to your gate and your budget, not steer you toward a replacement just because that’s what we stock.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lantana
We work on nine major gate-automation brands, including FAAC, BFT, Linear, and Viking. That matters in Lantana because Gate Installation in Lantana often involves a motor that was installed years ago and has been failing slowly in the salt air. If your existing operator still has life left, we’ll tell you. If it’s gone, we’ll recommend a replacement that’s rated for coastal use and we’ll install it right. Our Gate Installation team keeps local stock of the most common parts and can have most Lantana installations scheduled within the same week.
Common Gate Installation Problems We See in Lantana Homes
- Galvanic corrosion at the mounting hardware. Aluminum gates look fine, but the steel bolts holding the hinges to the post corrode and seize within three to five years of Intracoastal exposure. We see this on canal-side blocks east of Dixie Highway all the time.
- Hinge post failure on older slabs. Many Lantana homes from the 1950s and 1960s have driveway slabs that have shifted with South Florida’s expansive soil. When the post moves, the gate sags and the operator strains. We address this with deeper footings and new galvanized posts.
- Motor seal and operator board failure from humidity. Year-round humidity above 70 percent and salt air shorten operator life well below manufacturer specs. We recommend sealed, coastal-rated operators and schedule maintenance to catch seal failures early.
- Wind-load code issues at install. Palm Beach County’s post-Andrew code requires automatic gate operators to fail-safe open. If you’re replacing an old operator or installing a new one, this is a compliance point that comes up on virtually every permit pull in Lantana. We handle it before inspection, not after.
Pricing for Gate Installation in Lantana, FL
Here’s what you can expect to pay for gate installation in Lantana:
- Pedestrian gate, aluminum, manual hardware: $900-$2,400
- Single swing driveway gate, aluminum, manual: $2,800-$4,200
- Single swing driveway gate with operator: $3,800-$6,200
- Double swing gate with operator and access control: $5,500-$9,400
- Sliding gate with operator and track bed: $4,200-$8,500
What changes the number? Gate material and size, whether you need a power run from the house to the gate, the condition of your existing posts, and which operator brand you choose. We’ll hand you a written price with line items before any work starts. Estimates are free. Call (561) 725-8048 and we’ll schedule a measure.
We Also Serve Cities Near Lantana
Our Lantana customers often ask if we cover nearby communities, and the answer is yes. We install gates throughout Palm Beach County, including West Palm Beach, Westgate, Riviera Beach, and Lake Park. Same-week scheduling applies to most of our coverage area, not just Lantana itself.
Serving Lantana, FL - Our Local Coverage Area
We’re based in the Lantana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Lantana
Salt air accelerates corrosion on steel hardware, so a new gate installation in Lantana needs stainless steel fixings, galvanized posts, and a coastal-rated operator to last. Aluminum gates themselves don’t rust, but the bolts, hinges, and anchor hardware will eventually seize if they’re ordinary steel. Call (561) 725-8048 to discuss materials for your specific lot.
The biggest mistake is reusing the existing hinge posts without checking whether the concrete slab has shifted. On Lantana’s 1950s and 1960s homes, slabs move with the expansive soil, and a new gate mounted to a tilted post will sag within months. We inspect the post, the slab, and the footing before we quote.
Yes. Palm Beach County’s post-Andrew wind-load code requires automatic gate operators to fail-safe open so the gate can be opened by hand or automatically if power fails during a storm event. We install operators configured to meet this requirement on every Lantana job.
What you’re seeing is galvanic corrosion: the aluminum gate is fine, but the steel mounting hardware is reacting with the salt air and the aluminum itself. In Lantana’s Intracoastal exposure, this happens within three to five years. Our Gate Installation team replaces the steel with stainless and zinc-coated fixings to stop the reaction.
A swing gate is usually the better choice for a short, flat driveway because it costs less and needs less track work. A slide gate makes sense if your driveway slopes toward the street or if a swing arc would block a sidewalk or landscaping. We’ll measure and show you both options in writing before you commit.
Call Us for a Free Gate Installation Estimate in Lantana
We’re ready to measure your driveway, talk through materials and operators, and hand you a written price before any work begins. No surprise invoices, no verbal estimates, no pressure. Call (561) 725-8048 any time, day or night, and a live person will answer. If you have a written estimate from another company, bring it in for a free second opinion. We’ll tell you honestly whether it’s fair, and we’ll show you what we’d do differently.
Written by Adrian Vance, Owner at Vance Gate Repair West Palm Beach, serving Lantana and Palm Beach County since 2014.