Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Palm Beach, FL
Gate repair in Palm Beach means working on custom ornamental iron hung on 1920s Mizner-era estates, not standard subdivision entries. The barrier island’s salt-laden air corrodes hinges, welds, and operator hardware from both the Atlantic and Intracoastal sides simultaneously, so a gate that looks fine from the driveway is often hiding structural fatigue where the iron meets the pilaster. If your gate is sagging, sticking, or failing to open reliably, call (561) 725-8048 and a live person answers, any hour.
Why Palm Beach Homes Are Different
Palm Beach’s housing stock skews toward large historic estates, especially the Addison Mizner-designed Mediterranean Revival mansions from the 1920s along South Ocean Boulevard, El Bravo Way, and Worth Avenue. These properties feature wrought-iron and cast-iron gates that were architect-designed as site elements, scaled to grand motor courts, and often still hung on original lime-mortar pilasters. Re-anchoring a hinge or replacing a post on one of these entries requires masonry care, not just metalwork. Drill too aggressively into coral-stone or stucco and you crack a historic pilaster, which can trigger review by the Town of Palm Beach’s Architectural Commission (ARCOM), a regulatory layer that doesn’t exist in West Palm Beach or Palm Beach Gardens.
On top of that, the island’s geography doubles the corrosion load. Gates here face salt spray from the ocean on the east and the Intracoastal on the west. Powder coatings fail sooner, welds rust faster, and automation components degrade quicker than anywhere inland. Annual inspection and re-coating of ornamental iron is close to mandatory on this island, and repairs on 1920s gates often require period-appropriate materials rather than off-the-shelf replacements.
Our Main Palm Beach Services
The two services Palm Beach homeowners call about most are gate access control and gate parts and welding. Below are the three other core services we handle on the island, each with its own dedicated Palm Beach page.
Gate Repair in Palm Beach
Full mechanical and electrical repair for sagging, sticking, or non-operating gates on Palm Beach’s estates and newer builds. We diagnose operator faults, hinge wear, and track misalignment, then hand you a written price before any work begins. On historic properties, we match period hardware rather than forcing a modern replacement. See Gate Repair in Palm Beach for the full breakdown.
Gate Installation in Palm Beach
Custom gate installation scaled to Palm Beach’s motor-court entries, from heavy ornamental iron on Mizner-era estates to contemporary steel on newer builds. We handle the masonry interface carefully on older pilasters and coordinate with ARCOM requirements where the property falls under review. Gate Installation in Palm Beach details the process.
Gate Motor & Opener in Palm Beach
Automation service on whatever operator is already on the property, not a push toward replacement. We service nine brands including FAAC, BFT, and Linear, and the salt air here means operator enclosures and limit switches need more frequent attention than inland. Read Gate Motor & Opener in Palm Beach for specifics.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Palm Beach
Palm Beach estates run on access control that has to balance privacy with daily traffic: staff, landscapers, delivery services, and guests. On these properties, the keypad or phone-entry system is often controlling a custom ornamental gate that costs more than many full driveway gates elsewhere, so a failed relay or corroded control board isn’t a convenience issue, it’s an entry problem that stalls the entire motor court until it’s fixed. Our work here covers every access layer, from keypads and remotes to full-fleet Gate Access Control programming, always with a written price before the first tool comes out.
Keypad Entry
Signs you need it
The keypad intermittently rejects valid codes, works only in one direction, or the keypad face has fogged from salt intrusion.
What it costs in Palm Beach
Expect $180 to $450 depending on whether we’re replacing the keypad unit or just the internal contacts and seals.
How we do it
We test voltage at the keypad, isolate whether the fault is at the pad, the control board, or the wiring run, then replace the failing component and photograph the new settings.
Phone Entry
Signs you need it
Callers reach voicemail or a dead line instead of your phone, or the system stops dialing your gate code after a storm.
What it costs in Palm Beach
Most phone-entry fixes land between $200 and $520 when reprogramming or a new cellular module is involved.
How we do it
We verify the SIM or cellular connection, confirm the relay fires when a test call comes through, and re-register the authorized numbers before documenting the programming.
What Gate Access Control Costs in Palm Beach
| Item | Typical range in Palm Beach |
|---|---|
| Keypad entry repair or replacement | $180 - $450 |
| Phone entry reprogramming or module | $200 - $520 |
| Video intercom integration | $320 - $790 |
Can you reprogram my existing keypads without replacing the whole system?
Yes. In most Palm Beach homes we can reflash or re-register existing keypads and remotes rather than swapping hardware. If the contacts are corroded from salt air, we replace only the corroded component and leave the working parts alone. Call (561) 725-8048 for a written quote.
Do you handle access control for estate staff and vendors on Palm Beach properties?
We do. We program distinct codes or schedules for staff, vendors, and service vehicles so you can revoke a vendor’s access without changing the family’s codes. The record of every code change is documented in the job file we leave with you.
Gate Parts & Welding in Palm Beach
On a 1920s Mizner estate, the gate hardware isn’t a stock item. Palm Beach gates need parts fabricated or sourced to match original detailing, and welding here often happens on ornamental iron that’s been exposed to salt air for a century. Our Gate Parts & Welding work covers everything from hinge replacements on masonry pilasters to rail repairs and custom fabrication, always with a written scope and price documented before we strike an arc.
Hinge Replacement
Signs you need it
The gate drags on the latch side, leaves scrape marks on the drive, or the hinge pin is visibly worn or rusting through.
What it costs in Palm Beach
Hinge replacement runs $220 to $620 per hinge set depending on gate weight and whether the mounting plate must be re-anchored into masonry.
How we do it
We support the gate to remove load from the hinge, extract the old hardware without drilling the pilaster excessively, and install a matched set with new anchors rated for the gate’s weight.
Custom Welding
Signs you need it
Pickets or scrollwork are cracked, a section of the frame has separated at a joint, or a previous weld is failing from rust bleed-through.
What it costs in Palm Beach
Custom welding typically falls between $150 and $500 per section when we’re repairing original iron and coating the repaired area against salt intrusion.
How we do it
We grind the failed area back to sound metal, weld with rod matched to the original material, and apply the same protective coating system the surrounding iron carries.
What Gate Parts & Welding Costs in Palm Beach
| Item | Typical range in Palm Beach |
|---|---|
| Hinge replacement | $220 - $620 per set |
| Custom welding repair | $150 - $500 per section |
| Gate rollers | $120 - $340 per roller set |
Can you match the original ironwork on a historic Palm Beach gate?
Yes. We source period-appropriate materials and fabricate sections to match the surrounding scrollwork and picket spacing. On ARCOM-regulated properties, we document the match before installation so your review package is straightforward. Call (561) 725-8048 to discuss your gate.
Is welding safe on a gate still attached to an operator?
The operator must be disconnected and locked out before any welding begins. Our techs isolate the motor and control board first, because a stray ground current can fry a board in one pass. Welding on gates with high-tension or heavy load components should always be done by a trained professional.
Brands We Service in Palm Beach
We service FAAC, BFT, Linear, and Viking operators among the nine major automation brands we carry parts for, and we don’t push replacement when repair makes sense. Having our brands covered means we can usually diagnose and fix a Palm Beach gate in one visit instead of scheduling a follow-up for parts.
Pricing for Gate Repair in Palm Beach, FL
| Service | Typical range in Palm Beach |
|---|---|
| Keypad entry repair or replacement | $180 - $450 |
| Phone entry reprogramming or module | $200 - $520 |
| Video intercom integration | $320 - $790 |
| Hinge replacement | $220 - $620 per set |
| Custom welding repair | $150 - $500 per section |
| Gate rollers | $120 - $340 per roller set |
| Gate motor repair | $250 - $600 |
| Gate opener replacement | $450 - $1,200 |
Palm Beach prices run toward the upper end of these ranges because salt-air corrosion often means we’re replacing a component and repairing the mounting point at the same time. Every price is written and handed to you before any work starts, and the price we quote is the price you pay.
Neighborhoods We Serve in Palm Beach
We work across the entire island of Palm Beach, from the historic estates along South Ocean Boulevard to the mid-century and newer builds throughout the town. Typical response for a gate repair call on the island is same-day for emergencies, next-day for scheduled work.
- South Ocean Boulevard
- El Bravo Way
- Worth Avenue district
- North End estates
- Midtown Palm Beach
Service Area - Cities Near Palm Beach
From our base serving Palm Beach, we also cover West Palm Beach, FL across the bridge, North Palm Beach, FL to the north, Palm Beach Gardens, FL further up the coast, and Greenacres, FL inland. The same written pricing and documented photo record apply in every city we serve.
Serving Palm Beach, FL - Our Local Coverage Area
We’re based in the Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Palm Beach
Same-day for a gate that won’t close or won’t open. Since Palm Beach is a barrier island with limited access points, we coordinate dispatch from our South Florida office so a tech can be on the island without fighting bridge traffic from the wrong direction. Call (561) 725-8048 and a live person answers.
If your property is historically designated or falls under the Town of Palm Beach Architectural Commission’s purview, modifications to original gate elements may require review. Repairs that match existing materials and design are often treated differently than replacement or redesign. We document every material match to support whatever filing your property requires.
The written price includes all parts, labor, and the documented photo record of what was found, what was replaced, and what was adjusted. It’s the price you approve before any work starts, and the price you pay when the job is done. No surprises at the end.
Call (561) 725-8048 for a free estimate on any gate repair in Palm Beach. A live person answers 24 hours a day, seven days a week, and the price you get is the price you’ll see in writing before anyone picks up a tool.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Palm Beach Customers Say
"Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H.