Ghost Controls Gate Access Control Nationwide

Ghost Controls Gate Access Control in West Palm Beach: What to Know First

We service Ghost Controls gate access control systems across West Palm Beach as an independent provider, and we’re not attached to the manufacturer’s service network. Most Ghost Controls access problems – a keypad that quit talking to the board, a remote that works only from ten feet away, an intercom that rings but won’t release the gate – get diagnosed on the first visit and repaired the same day if we have the part on the truck. The price you’ll pay is written down and handed to you before we touch anything, so you’re never standing there with a surprise invoice at the end.

Call (561) 725-8048

This page is for West Palm Beach homeowners who own a Ghost Controls opener and need the access side of it working again: keypads, remotes, phone entry, card readers, video intercoms, or smart access. If that’s you, call (561) 725-8048 and a live person answers. Always.

How Ghost Controls Products Fail – and How We Fix Them

Ghost Controls builds a solid residential opener, but after enough installs in West Palm Beach’s salt air and afternoon storms, certain failures show up more than others. We see these patterns regularly, and we know what to check first.

• AXDP keypads going silent after a power blip. The keypad still lights up, but the board inside the opener doesn’t register the code anymore. What’s actually happening is the keypad’s transmitter drifted off its paired frequency after a surge, and the control board never re-learned it. We re-pair the keypad, verify the code entry, and photograph the new setting so you have a record.
• Remote range collapsing to a few feet. This one shows up especially on the TSS1 and TDS2 series remotes. Homeowners replace the battery and still get nothing past the end of the driveway. The usual culprit in West Palm Beach is a receiver antenna that got bent or corroded by salt air, or a gate frame that’s grounding out after a storm. We check the antenna, clean or replace the connector, and test range from the street before we pack up.
• Phone entry systems that ring but never open the gate. The call connects, you press 9, and nothing happens. On Ghost Controls setups, this is frequently a relay on the opener board that’s no longer pulling in, or a phone-entry module that lost its programming after a brownout. We trace which side failed first, replace only what’s dead, and test the full call-to-open sequence three times.
• Intercom audio that’s half-broken. You can hear the visitor but they can’t hear you, or vice versa. On the CDS and AXDP intercom-combo units, this is commonly a corroded terminal on the speaker wire where humidity worked its way in. We open the housing, inspect the terminals, re-terminate where needed, and document it with photos before closing it back up.
• Smart access apps losing connection to the control board. The Ghost Controls app worked fine for a year, then the gate shows “offline” permanently. We’ve traced this to the accessory receiver losing its Wi-Fi credentials after a firmware push, or a router change nobody thought about when the homeowner upgraded. We re-establish the pairing, confirm the app opens and closes the gate from the street, and note the firmware version on your service record.

Our Ghost Controls Gate Access Control Process

Here’s what a Ghost Controls access control call looks like when we show up in West Palm Beach:

1. 1
   We listen to the exact symptom. Not the general idea – the exact thing that fails, when it fails, and what you’ve already tried. This tells us which component to test first.
2. 2
   We test the signal path end to end. Keypad to board. Remote to receiver. Intercom to relay. We isolate the failure before we quote anything.
3. 3
   We show you the written price. Before any work starts, you get a flat number for parts and labor. If we find something else once we’re in there, we stop and show you a new written number before proceeding.
4. 4
   We install the right part. We use Ghost Controls OEM parts where it makes sense, especially on warranty-sensitive components like the control board. For older models where OEM is discontinued or backordered, we’ll use a quality aftermarket equivalent and tell you exactly why.
5. 5
   We test everything, then test it again. Two remotes, keypad codes, phone entry, app access – whatever your system uses, we run the full sequence multiple times.
6. 6
   We hand you the photo record. What we found, what we replaced, what we set. You keep a copy. We file a copy. No future technician has to guess what was done.

Before

After

What Ghost Controls Gate Access Control Costs in West Palm Beach

Here are honest numbers for the West Palm Beach market. These are ranges, not quotes – your exact price depends on your model and what we find on site – but they’ll keep you from being surprised.

• Service call and diagnostic: $79-$149, depending on where in West Palm Beach you are. This gets you the diagnosis, the written quote, and the photo record even if you decide not to proceed with us.
• Keypad replacement or re-pairing: $120-$280. Re-pairing is on the low end. A new OEM keypad is on the higher end.
• Remote programming or replacement: $60-$160 per remote, OEM or quality aftermarket.
• Phone entry system repair: $195-$420. Relay replacement on the opener board is less. Replacing a dead phone-entry module is more.
• Video intercom replacement: $450-$1,100, depending on whether we’re doing a like-for-like swap or running new wiring.

What moves the price: whether we’re re-pairing an existing component or replacing it, whether OEM parts are available, and whether we’re dealing with corrosion damage on the cable runs. Every quote is written, flat, and handed to you before work starts. Call (561) 725-8048 for an exact number – estimates are free.

Why West Palm Beach Homeowners Call Vance Gate Repair West Palm Beach for Ghost Controls Work

Most of our Ghost Controls customers in West Palm Beach came to us after another company left no paperwork and couldn’t explain what they did. That’s not how we work. Adrian Vance started this company after a decade of commercial access-control installs, and the documentation habit never left him. Every Ghost Controls job we touch gets a photo log and a written record of part numbers, settings, and test results. You’ll be able to read it. That’s the entire point.

We also don’t push you toward a new opener when the one you have is repairable. Ghost Controls is one of nine brands we service – LiftMaster, Mighty Mule, and DoorKing among them – so we have no incentive to sell you a replacement you don’t need. Our 365-Day Done Right Promise means if the access repair isn’t right, we make it right within a full year, no argument and no fee, under Clause 4 of our Haven Standard. A live person answers the phone 24 hours a day, every day, at (561) 725-8048.

FAQs