Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Jupiter
Gate repair in Jupiter, FL typically costs $180-$2,400 depending on whether you’re dealing with a misaligned hinge, a corroded operator board, or a leaning post in sandy soil, and most residential repairs are completed in a single visit. We dispatch background-checked, uniformed technicians to every Jupiter neighborhood from Tequesta Drive down to the Palm Beach County line, with live phone coverage around the clock at (561) 725-8048. Jupiter is a split-market town: HOA-spec access control along the Intracoastal and owner-built farm gates west of the turnpike. We work on both every day.
Why Vance Gate Repair West Palm Beach Is Jupiter’s Preferred Gate Repair Company
Jupiter homeowners call us because we hand them a written price before any work begins and a photographed record of what we found when we leave. That’s the Haven Standard, and it’s how Adrian Vance has run every job since 2014. No verbal estimates, no invoice surprises, no making you pay twice to rediscover the same problem. Under Clause 1, the flat price is on paper in your hand before a tool comes off the truck.
The local work in Jupiter tends to cluster in two very different places. Along the Intracoastal in communities like Admirals Cove and Frenchman’s Creek, the gates are heavy, custom, and governed by HOA boards who care about credentialing and documentation. West of the turnpike in Jupiter Farms, the gates are often owner-built steel or tubular swing installations sitting on footings that were never engineered for the soil. A gate company that only understands one of those worlds will misdiagnose the other. We see both in the same day.
Response time to most Jupiter addresses runs 60-90 minutes for emergency calls, and our techs roll with the parts to handle FAAC, Linear, BFT, and Viking operators already on the property. We don’t push replacement when repair is the right call. Under Clause 4, you get a photo log of every adjustment, every limit-switch reading, and every part number installed, handed over before we leave.
Our Gate Repair Services in Jupiter
Electric Gate Repair
Electric gate repair in Jupiter usually comes down to one of three failures: a control board cooked by a summer lightning strike, a motor housing corroded by salt air off the Intracoastal, or a photo-eye knocked out of alignment by wind or landscape work. We carry boards and motors for LiftMaster, FAAC, BFT, Linear, and Viking systems, so we’re not waiting on a part while your gate sits open. Most board replacements in Jupiter run $280-$650 installed. Motor replacements run $900-$2,400 depending on brand and whether the arm bracket is intact.
Automatic Gate Repair
An automatic gate that won’t open or won’t close in Jupiter is frequently an electrical problem with a mechanical cause underneath. Limit switches that were never reset after a storm, a capacitor degraded by heat and humidity, or an actuator arm binding because the post shifted half an inch. We read the motor, not just the symptoms. If your gate opens six feet and stops, we’re checking travel stops, not just swapping parts on a guess. Under our 365-Day Done Right Promise, if the repair isn’t right, we make it right at no additional charge.
Hinge & Post Repair
This is the repair Jupiter Farms homeowners rarely expect. The sandy, loose fill soil west of the turnpike doesn’t hold gate posts the way clay does, and after heavy rain the post and hinge assembly leans or sinks, binding a gate that still has a perfectly functional motor. We reset sagging hinges, pour new concrete footings below the heave line, and realign the gate to spec. Hinge and post repair in Jupiter typically runs $300-$900 for a single post reset, more if the post must be cut out and replaced.
Gate Realignment
A gate that drags, scrapes, or won’t latch in Jupiter usually isn’t broken. It’s shifted. Salt corrosion on hinge pins accelerates the process along the Intracoastal, and sandy soil compounds it in Jupiter Farms. We realign the leaf, re-tension the hinges, and reset the operator travel so the motor isn’t fighting the frame. Gate realignment in Jupiter runs $180-$400 for most residential gates, and we photograph the adjusted position so you can see exactly what changed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Jupiter
We service nine major gate-automation brands, which means we repair the motor already on your Jupiter property rather than steering you toward a replacement. FAAC, BFT, Linear, and Viking systems are common in this market, particularly FAAC swing operators on older HOA entry gates and Linear slide operators on the newer communities. We stock replacement boards, remotes, photo-eyes, and hinge hardware for these brands so most Jupiter repairs don’t wait on shipping. If you’re not sure what motor you have, a photo of the control board sent to us will usually identify it before the tech arrives.
Common Gate Repair Problems We See in Jupiter Homes
- Salt corrosion on hinge pins and operator housings. Direct Atlantic exposure and the moisture off the Intracoastal Waterway eat through unprotected steel fasteners and motor casings faster than anything 20 miles inland. Jupiter gates need marine-grade hardware; the hardware that works in Palm City often won’t survive six years here.
- Lightning-killed control boards on HOA slide gates. From June through September, Jupiter’s afternoon storms put thousands of volts into ungrounded gate lines. A dead keypad and an unresponsive motor during storm season is usually a fried board, and the fix includes a surge suppressor so it doesn’t happen again next month.
- Leaning or sinking posts in Jupiter Farms. The sandy fill west of the turnpike doesn’t resist heave, and a post set without a deep enough concrete footing will lean after heavy rain. The gate binds, the motor strains, and homeowners burn through boards wondering why the new one keeps failing. The board was never the problem.
- Misaligned photo-eyes on HOA entry systems. A photo-eye, the infrared beam that stops the gate if something crosses its path, gets knocked out of alignment by mowers, landscapers, or high wind. The gate refuses to close and the community board thinks the operator is dead. It’s usually a two-inch adjustment and a re-aim.
Pricing for Gate Repair in Jupiter, FL
Here’s what gate repair in Jupiter actually costs. Gate realignment: $180-$400. Hinge and post repair: $300-$900 for a single post reset. Control board replacement: $280-$650 installed. Motor replacement: $900-$2,400 depending on the brand and whether the arm bracket and chain are still good. Weld and rust repair on ornamental iron: $150-$500 per section, plus finishing. The price on your job is the price on the written estimate. You get it before any work starts, and you approve it before anything is installed. No surprises at the end. Call (561) 725-8048 for a free estimate, and if you’ve got an estimate from another company, bring it in. We’ll review it at no charge and show you line by line where it’s fair and where it isn’t.
We Also Serve Cities Near Jupiter
Our Gate Repair team covers Jupiter and the surrounding Palm Beach County communities, including Palm Beach Gardens, North Palm Beach, West Palm Beach, and Palm Beach. If your property sits in one of those cities and your gate is down, the same written-price standard and same documented record apply. You can read more about our work specifically in this area on our Gate Repair in Jupiter page.
Serving Jupiter, FL - Our Local Coverage Area
We’re based in the Jupiter area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Jupiter
Salt air corrodes hinge pins, motor housings, terminal connections, and unsealed control boards far faster than inland air, and on Jupiter’s Intracoastal-facing properties that means a gate motor that might last 12 years in Loxahatchee could be failing at seven or eight. The fix is marine-grade stainless or aluminum hardware wherever it touches the outside, plus dielectric grease on electrical connections and a sealed, gasketed enclosure for the board. Most Jupiter coastal homes have enough corrosion by year five that a standard steel hinge pin is already pitted. Call (561) 725-8048 for an inspection before a hinge fails outright.
Because the post shifted. Jupiter Farms sits on loose, sandy fill that doesn’t hold a gate post the way clay does, and a post set without a concrete footing below the heave line will lean or sink after heavy rain, binding the gate even though the motor is fine. We reset the post, pour a new footing deeper than the original, and realign the gate so the operator isn’t holding the whole structure up. This is a structural repair, not an electrical one, and it’s the most commonly misdiagnosed gate problem in Jupiter Farms.
A lightning strike or power surge burned out the control board. Jupiter’s summer storm season is intense, and HOA slide gates run on long power and low-voltage lines that act as antennas for surge. The most common summer call we get is a dead board with no surge suppressor on the line. We replace the board, set the travel and entrapment parameters, and install a surge suppressor so the same storm doesn’t kill the new one in August.
Yes. Under UL 325 and Florida building code, any automatic gate serving a Jupiter HOA entry must have a functioning secondary entrapment protection device, typically photo-eyes or contact edges, that reverses the gate if it encounters an obstruction. A gate built before the current code may have been grandfathered at installation, but once you replace the operator or the control board, code requires the entrapment protection be brought up to current standard. We set and test this on every HOA gate repair we do. If your board is set with entrapment disabled, that’s a failure we’ll flag in writing.
Almost always, yes. Custom ornamental iron and fabricated steel gates in Jupiter are often repairable section by section: a rusted hinge barrel can be cut out and replaced with a marine-grade stainless one, a bowed or cracked rail can be jigged and re-welded, and a dragging leaf can be realigned without touching the rest of the gate. We weld on site, so the gate doesn’t leave the property. The exceptions are severe rot through the main frame or a design where the hinge posts themselves are failing, but even then we quote the repair against the replacement and you decide with both prices in writing.
If your gate is down in Jupiter, call (561) 725-8048. A live person answers around the clock, the estimate is free, and the price is in writing before the first bolt is turned.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Jupiter and Palm Beach County since 2014.